Turbo Guard SF 3.00 Black

Black Stainless Steel Screen……223 lbs per sq/inch Bursting Test
Premium Stainless Steel Clamp
100% made in USA – NOT FOR SUPERCHARGERS
The only true ONE-PIECE Design on the market
Turbo-Guard SF is recommended for lower boost applications <25psi and replaced yearly due to the extreme conditions they are used in.

The Standard Screen Will not fit on the 5″ S400 series turbos or ANY Superchargers. Do to the fact the impeller shaft sits too close to the end of the snout and it will rub a hole in the screen when it flexes. Also some supercharger do not have a 1″ lip to clamp it too. This is the reason the Maxx is the Only option for S400 standard covers and superchargers!
Our ONE piece design is, by far, the best/safest option if you run a screen filter or don’t have room for a cone filter! Quick and Easy installation and removal. Our Screen is molded into premium silicone all the way under the clamp (unlike the knockoffs). This makes the design much stronger preventing the screen from getting sucked in.

-Protects against large debries from entering your turbo and causing catastrophic failure, costing you thousands to fix. (birds, rocks, body parts etc….)

-Not as bulky as those big cone filters so it can fit into small tight spaces where turbos often hide

-Great look for styling your ride. -Stainless Steel Clamp.

-Let the Turbo Noises out! -Black Stainless Steel Screen……200 lbs per sq/inch bursting test.