| Model | Front Oil Weight | Rear Oil Weight |
|---|---|---|
| 4-Tec 2.0 VXL | 4-Tec 2.0 BL-2S | 4-Tec 3.0 Supra/Corvette/Hot Rod | 50WT | 50WT |
| 4-Tec Drift 240SX | 4-Tec Drift Mustang | 20WT | 20WT |
| Bandit XL-5 | Bandit VXL | 30WT | 30WT |
| Bigfoot 1/10 2WD BL-2S | Bigfoot 1/10 2WD XL-5 | 30WT | 30WT |
| Bigfoot 1/10 4×4 BL-2S | Bigfoot 1/10 4×4 BL-2S 50th Anniversary | 50WT | 50WT |
| Drag Slash C10 | Drag Slash Mustang | 20WT | 60WT |
| Fiesta Rally ST VXL | Fiesta Rally ST BL-2S | 60WT | 40WT |
| Funco Pro Scale Sand Car | 80WT | 80WT |
| Jato 4×4 VXL | 50WT | 60WT |
| Jato 4×4 BL-2S | 40WT | 50WT |
| Late Model | 50WT | 50WT |
| Maxx | Widemaxx | 60WT | 60WT |
| Maxx Slash | 60WT | 60WT |
| Mini Maxx | 20WT | 20WT |
| Mini Rally RS200 | 50WT | 50WT |
| Mini Slash | 40WT | 40WT |
| Mini XRT | 20WT | 20WT |
| Modified/Mudboss | 50WT | 50WT |
| Nitro Jato 3.3 | 30WT | 30WT |
| Nitro Revo 3.3 | 30WT | 30WT |
| Nitro Rustler 2.5 | 30WT | 30WT |
| Nitro Slayer Pro | 30WT | 30WT |
| Nitro T-Maxx 2.5 | 30WT | 30WT |
| Nitro T-Maxx 3.3 | 40WT | 40WT |
| Rustler 2WD BL-2S | Rustler 2WD XL-5 | 30WT | 30WT |
| Rustler 4×4 BL-2S | Rustler 4×4 VXL | 50WT | 30WT |
| Rustler 4×4 Ultimate | 30WT | 30WT |
| Slash 2WD BL-2S | Slash 2WD VXL | 30WT | 30WT |
| Slash 4×4 BL-2S | Slash 4×4 VXL | 50WT | 40WT |
| Slash 4×4 Ultimate | 30WT | 30WT |
| Sledge | 60WT | 50WT |
| TRX-4 4×4 All Models | 30WT | 30WT |
| TRX-6 6×6 All Models | 30WT | 30WT |
| UDR Unlimited Desert Racer | 30WT | 60WT |
| X-Maxx | X-Maxx Ultimate | X-Monster Chassis | X-Monster Bigfoot 50th | 30WT | 30WT |
| XO-1 Supercar | 80WT | 80WT |
| XRT | XRT Ultimate | 30WT | 40WT |
| Model | Front Oil Weight | Rear Oil Weight |
Author: Anthony
-

Shock Oil Weight by Model
-

Sledge Pinion/Spur Gear Chart and Part Numbers
Pinion/Spur Motor Gearing
- Stock
- Recommended High Speed
- Not Recommended High Speed (fits but will probably overheat)

-

X-Monster Pinion/Spur Gear Chart and Part Numbers
Xmonster X-Monster
Below are the original and optional pinion/spur gear combinations with part numbers. The letters in the chart are the motor locating pin locations, if you change the gear size/tooth count, make sure you’re installing the pins in the correct locations.
Standard X-Monster Chassis
The X-Monster comes with a 15 tooth pinion and 54 tooth spur gear. In the box is an optional 18 tooth pinion and 46 tooth spur gear for higher speeds. Speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds.
Standard X-Monster stock pinion gear: Traxxas 6487X 15T Pinion Gear
Standard X-Monster stock spur gear: Traxxas 6449R 54T Spur Gear
Standard X-Monster included high speed pinion gear: Traxxas 6491X 18T Pinion Gear
Standard X-Monster included high speed spur gear: Traxxas 6447R 46T Spur Gear
-

X-Maxx Pinion/Spur Gear Chart and Part Numbers
Xmaxx X-Maxx
Below are the original and optional pinion/spur gear combinations with part numbers. The letters in the chart are the motor locating pin locations, if you change the gear size/tooth count, make sure you’re installing the pins in the correct locations.
Gearing is different between earlier (non-belted tires) X-Maxx trucks and later (belted tire) X-Maxx trucks. Please confirm you’re using the correct chart. This is also the gearing chart you’ll use if you install X-Maxx wheels and tires on an XRT.
Standard X-Maxx with Belted Tires
The standard non-ultimate X-Maxx with belted tires comes stock with a 15 tooth pinion and 54 tooth spur gear. In the box is an optional 18 tooth pinion and 46 tooth spur gear for higher speeds. Speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds.
Standard X-Maxx stock pinion gear: Traxxas 6487X 15T Pinion Gear
Standard X-Maxx stock spur gear: Traxxas 6449R 54T Spur Gear
Standard X-Maxx included high speed pinion gear: Traxxas 6491X 18T Pinion Gear
Standard X-Maxx included high speed spur gear: Traxxas 6447R 46T Spur Gear
Standard X-Maxx without Belted Tires
The standard non-ultimate, non-belted tire X-Maxx comes stock with a 18 tooth pinion and 54 tooth spur gear. In the box is an optional 18 tooth pinion and 46 tooth spur gear for higher speeds. Speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds.
Standard X-Maxx stock pinion gear: Traxxas 6491X 18T Pinion Gear
Standard X-Maxx stock spur gear: Traxxas 6449R 54T Spur Gear
Standard X-Maxx included high speed pinion gear: Traxxas 6491X 18T Pinion Gear
Standard X-Maxx included high speed spur gear: Traxxas 6447R 46T Spur Gear
X-Maxx Ultimate
All X-Maxx Ultimate models come with belted tires and an 18 tooth pinion with 54 tooth spur gear. The original gears are hardened steel and are already in the high speed ratio for an X-Maxx with belted tires. No optional gears are included with the X-Maxx Ultimate models. If you do choose to install higher speed gears in your Ultimate, remember, speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds.
X-Maxx Ultimate stock pinion gear: Traxxas 6491R 18T Pinion Gear
X-Maxx Ultimate stock spur gear: Traxxas 6444 54T Spur Gear
-

New 2025 Traxxas 4S Raptor R Ultimate!
Traxxas is re-releasing the Raptor R in 2025 as a refreshed 4S Ultimate model. Part number 101177-4
A summary of whats new!
- 4S Power! The Raptor R now has the same power system as the 4S Jato 4×4 VXL, comprised of the new compact Traxxas VXL-4S ESC and the 540XL motor found in the Hoss/Stampede VXL, Maxx and Jato 4×4 buggy trucks.
- Aluminum GTR shocks
- Center differential and steel spur gear out of the 4S Jato 4×4 VXL
- High torque metal gear servo from the Traxxas Sledge
- Telemetry sensors included and preinstalled
- New extreme heavy duty size aluminum steering knuckles and hub/bearing carriers.
- Maxx duty driveshafts with 6mm axles
- New style Fox orange/black and gold/black color schemes.
- Color matched aluminum suspension/chassis components


Specs and Features
- Officially Licensed Ford F-150 Raptor R Clipless Pro Scale Body
- Molded scale details: bumpers, grille, tailgate, side mirrors, and hood vent
- LED lighting in front and rear bumpers
- Body reinforcements to prevent pull-through damage
- Clipless Body Mounting
- Holds tight for intense action
- 5 mm output shaft
- Quick and easy removal
- Smooth appearance with no body posts or clips
- Color-Matched Aluminum Suspension Parts
- 6061-T6 aluminum C-hubs
- 6061-T6 aluminum steering blocks
- 6061-T6 aluminum rear hub carriers
- VXL-4s Waterproof Electronic Speed Control
- 2s–4s LiPo compatible
- Real-time telemetry via Traxxas Link
- Selectable 7.4-volt high-voltage BEC
- Large Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode – Forward / Brake / Reverse
- Race Mode – Forward / Brake
- Training Mode™ – 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Integrated protection circuits
- LED status lights
- Velineon 540XL Brushless Motor
- Long format brushless motor
- 4-pole 2400 Kv
- 5 mm output shaft
- Low-maintenance design
- TQi™ 2.4 GHz Radio System with Wireless Module
- Factory-installed telemetry sensors
- TQi 2-channel high-power transmitter
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- 5-channel micro receiver (6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Suspension
- Heavy-duty suspension arms
- Adjustable 4 mm steel toe and camber links
- Aluminum oil-filled GTR shocks
- 70% more oil capacity than standard Ultra Shocks
- Threaded bodies with adjustable spring collars
- TiN-coated shock shafts to reduce friction
- Chassis
- Extended modular composite tub design
- Heavy-duty front & rear shock towers
- Secure battery hold-down latch
- Side nerf bars for impact resistance
- Steering
- 2275 waterproof metal-gear servo
- 347 oz-in torque @ 6.0 volts
- Aluminum center case w/ full bearings
- Dual bellcrank design with integrated servo saver
- 2275 waterproof metal-gear servo
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Center differential with 20-million weight oil
- Oil-filled, steel gear front and rear differentials
- Steel 32-pitch spur gear
- Anodized-aluminum center driveshaft
- Maxx-duty driveshafts
- Oversize diameter
- 6 mm axles
- Wheels and Tires
- Licensed Ford replica option wheels
- 2″ outer diameter, 3″ inner diameter
- Licensed BFGoodrich All-Terrain T/A KO2 tires
- Large 114 mm diameter
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
- Licensed Ford replica option wheels
-

Traxxas ID Battery Chargers
This post hopes to clear up some confusion and answer common questions we receive.
First common question, yes, most Traxxas chargers can charge both Traxxas ID batteries and non-traxxas batteries. Non-Traxxas batteries will need to be manually configured.
Traxxas ID batteries dont have a balance connector, the wires are built into the single Traxxas high-current battery connector.
The ID system works with a small RFID chip in the battery connector that’s read by a reader in the charger. By connecting the battery, the charger is able to recognize the Traxxas battery, identify it’s serial number, capacity and cell count. The charger then applies the correct settings for the connected battery.
Traxxas has a wide range of available chargers that vary in cost, speed and capabilities.
USB-C Chargers
$19.95 Traxxas 2920 – 1 Amp. USB-C 2S iD LiPo charger. Included charger with the Traxxas Mini Maxx. Slow, only charges 2S batteries, requires a high output USB-C power brick and capable cable.
$21.95 Traxxas 2949 – 2 Amp. USB-C 5-7 Cell NiMH charger. Included charger with Traxxas 1/16 trucks. Slow, doesn’t charge LiPo, requires a high output USB-C power brick and capable cable.
$24.95 Traxxas 2982 – 4 Amp. USB-C 6-7 Cell NiMH charger. Included charger with Traxxas 1/10 trucks that include NiMH battery and charger. Doesn’t charge LiPo, requires a high output USB-C power brick and capable cable.
$39.95 Traxxas 2985 – 4 Amp. USB-C 5-7 Cell NiMH and 2S-3S LiPo charger. 4 Amp. Requires a high output USB-C power brick and capable cable.
Up to 3S LiPo Standalone Chargers
$59.95 Traxxas 2970 – 4 Amp single 5-8 Cell NiMH and 2S-3S LiPo charger. Has balance ports for non Traxxas batteries.
$119.95 Traxxas 2972 – 8 Amp dual 5-8 Cell NiMH and 2S-3S LiPo charger. Has balance ports for non Traxxas batteries. Charges one battery at 8 amps or two batteries simultaneously at 4 amps each.
Up to 4S LiPo Standalone Chargers
$99.99 Traxxas 2981 – 8 Amp single 5-8 Cell NiMH and 2S-3S-4S LiPo charger. Has balance ports for non Traxxas batteries.
$109.95 Traxxas 2971 – 12 Amp single 5-8 Cell NiMH and 2S-3S-4S LiPo charger. Has balance ports for non Traxxas batteries. LIVE Bluetooth connectivity for App features.
$169.95 Traxxas 2973 – 26 Amp dual 5-8 Cell NiMH and 2S-3S-4S LiPo charger. Has balance ports for non Traxxas batteries. LIVE Bluetooth connectivity for App features.
-

Traxxas TRX-4M and TRX-4M High Trail Suspension Link Lengths
Standard TRX-4M models, Ford Bronco and Land Rover Defender
Front lower links: 53MM
Front upper links: 46MM
Rear upper and lower links: 68MMTRX-4M High trail models, Ford F150 and Chevrolet K10 High Trail
Front lower links: 55MM
Front upper links: 48MM
Rear upper and lower links: 74MMTraxxas aluminum link upgrades are 5MM thickness and steel link upgrades are 4MM thickness.
-

Southland Speedway AKA West Delray R/C Dirt Oval Track
*This article is a work in progress, info, updates and class info will be added continuously*
Southland Speedway is located inside West Delray Regional Park at 10875 W Atlantic Ave in Delray Beach FL
Take i95, the Florida Turnpike or State Road 7 and exit west onto Atlantic. Take it all the way down. Atlantic ends at the park entrance. This is a public park, there are no fees or costs to enter and plenty of parking. This park also has mountain bike trails, fishing, disc golf, archery and an AMA R/C air field.

Southland Speedway doesn’t have an official website but there is an active Southland Speedway Facebook group.
You will need to bring your own power, shade, tools and supplies. Traxxas Slash based Nastruck, Bomber, Salvas Mudboss and Traxxas Modified (T-Mod) are the most common official club classes.
The club meets/races most Saturdays, their schedule can be found posted in the Facebook group.
The track is accessible outside of official track meet days but please be courteous, it is maintained and paid for by club volunteers and donations. If you do use it, don’t tear it up, pick up after yourself, leave the track cleaner than it was when you got there.
To race, you will need a 2 wire MYLAPS or MYLAPS compatible transponder.
-

XRT 8S Pinion/Spur Gear Chart and Part Numbers
The pin locations are different between the XRT and XRT Ultimate, please make sure you’re using the correct gearing chart. When you change the pinion/spur size, you’ll need to move the motor to the correct location for the new size gears. Do this by removing the 4 bolts under the motor, remove the motor and move the pin locations to the letters in the chart below for whatever ratio you’re using.
Standard XRT
The standard non-ultimate XRT comes stock with a 20 tooth pinion and 50 tooth spur gear. In the box is an optional 23 tooth pinion and 46 tooth spur gear for higher speeds. Speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds. The standard XRT comes with plastic motor mounts and you must use the pin locations in the standard XRT gearing chart below. If you’re using the Traxxas aluminum motor mounts, you’ll need to use the motor pin locations in the XRT Ultimate chart below.
If you’re installing X-Maxx size wheels and tires or paddles on either truck, you’ll want to use the X-Maxx gearing chart and use the X-Maxx pinion/spur ratios. XRT will typically over heat on the larger tires in the XRT ratios.
Standard XRT stock pinion gear: Traxxas 6494X 20T Pinion Gear
Standard XRT stock spur gear: Traxxas 6448R 50T Spur Gear
Standard XRT included high speed pinion gear: Traxxas 6481X 23T Pinion Gear
Standard XRT included high speed spur gear: Traxxas 6447R 46T Spur Gear
XRT Ultimate
The Ultimate XRT comes stock with a 20 tooth machined/hardened pinion and 50 tooth machined/hardened spur gear. In the box is an optional 23 tooth pinion and 46 tooth spur gear for higher speeds. Speed gearing will reduce battery life, increase motor temps and reduce torque in exchange for higher top speeds. The XRT Ultimate comes stock with the Traxxas aluminum motor mount upgrade, make sure you’re using the pin locations in the XRT Ultimate chart below and not the standard XRT chart.
If you’re installing X-Maxx size wheels and tires or paddles on either truck, you’ll want to use the X-Maxx gearing chart and use the X-Maxx pinion/spur ratios. XRT will typically over heat on the larger tires in the XRT ratios.
Ultimate XRT stock pinion gear: Traxxas 6494R 20T Hardened Pinion Gear
Ultimate XRT stock spur gear: Traxxas 6443 50T Hardened Spur Gear
Ultimate XRT included high speed pinion gear: Traxxas 6481X 23T Pinion Gear
Ultimate XRT included high speed spur gear: Traxxas 6447R 46T Spur Gear







